LEFT MENU

Contact Us

Got a question?Let us help.
Contact
AC Winch
380V-440V x 3ph AC, 3,500 kg lift Heavy duty high efficiency ball bearings on all running surfaces Planetary gears for maximum mechanical efficiency Extra heavy duty machine Cast steel foot mountings Fabricated steel drum Electromagnetic spring-applied fail safe brake Supplied on steel base plate ready to mount Rated capacity limiter limits driving power of the motor to prevent overloading of the winch Motor to IP54 as standard Enclosed drum flange to prevent rope becoming trapped between drum and support castings Low voltage control ass'y comes as standard Emergency stop function switch is available upon request Winch Weight  : 800 kg Gross Weight  : 870 kg Body Dimension (L x D x H)  : 1,439 × 740 × 860 mm Box Dimension (L x D x H)  : 1,590 × 840 × 1,020 mm
More
ELECTRIC WINCH
● 110V or 220V-240V x 1ph AC, 200 kg lift ● Positive retention of wire rope on to drum ● Electromagnetic spring-applied fail safe brake ● Heavy duty high efficiency ball bearing on all running surfaces ● Planetary gearing for maximum mechanical efficiency ● Enclosed drum flanges to prevent rope becoming trapped between drum and support steel plates ● Quiet running ● Emergency stop function switch is available upon request ● Low voltage control is available upon request ● Winch Weight  : 32 kg ● Gross Weight  : 34 kg ● Body dimension (L x D x H)  : 510 × 210 × 241 mm ● Box dimension (L x D x H)  : 610 × 286 × 285 mm
More
Seal Gen2 9.5rs / Self-recovery winch
12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations. Heavy duty series wound motor delivers superior torque output and faster line speed. A motor equipped with a thermal protection switch 4 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 90 degree increments. Hardened steel, 3-stage planetary gear train for efficient and reliable operation. Both built-in digital two ways wireless remote control and wired water-proof remote control. A 12 strand construction synthetic rope coated to improve abrasion and has no water absorption. Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch. U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load Specification / Part Number Part number: PN 295850 Rated line pull: 4,309 kg / 9,500 lb single line Motor: 3,730 w / 5.0 hp 12V series wound Gear ratio: 3-stage planetary 159:1 Clutch (freespooling): Rotating ring gear                              Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)  Winch construction: Aluminum die cast housings with steel drum Drum size: 63.5 x 227 x 273 mm (2.5” x 8.9” x 10.7") Control: Both built-in digital signal two ways wireless remote control and waterproof remote with thermometric indicator LED w/ 5 m (17') cord Rope type: Synthetic rope SK-75 Rope size: 10 mm x 30.5 m (3/8” x 100’) Mounting bolts pattern: 254 x 114 mm (10” x 4.5”) Mounting : Foot forward or foot down mounting workable Finish : Matte black powder-coated Winch weight (including rope) : 28 kg / 61.7 lb Gross weight : 40.5 kg / 89.1 lb Box dimension, (L x D x H) : 68
More

About Us

WE WORK FOR OUR CUSTOMERS.
NOT AN EQUITY FIRM.
Unlike most other winch companies, COMEUP is a family-run operation obsessed with the importance of detail appreciated by customers around the world. What we make must be the best. What we do must benefit our customers.

COMEUP Vertical Factory and Headquarters:
Quality From Within
Started over four decades ago, COMEUP instituted the Flexible Manufacturing System in conjunction with Mori Seki Japan. This emphasized controls at each step in the manufacturing process to assure high quality of each product component.

The COMEUP approach to process and quality thinking and execution is evident in the new, multi-floor factory. This vertical factory design increases control, efficiency and lines of communication compared to the typical single floor sprawl. The result is employee exposure to all product process stages and an engagement in quality output.

This is especially important with critical components, such as motors. Unlike other brands, COMEUP designs and manufactures their motors in their own manufacturing facility. This makes for perfect integration with the gear train and the COMEUP patented Cone Brake Structure. And COMEUP makes 70% of their components in-house.

Process and Safety Certified By Third Parties
COMEUP has TÜV Nord ISO 9001:2015 certification for quality management. COMEUP also has the CE marking for product safety requirements. Many products meet the IP68 International Protection marking protected from immersion in water with depth of more than 1 meter; ATV/UTV winches have EEC Directive 97/24/EC Chapter 8 from RDW-Netherlands and hydraulic winches are compliant with SAE J706 per TÜV Rhineland.

More